Planning > Program

Week Mon. 20 Tue. 21 Wed. 22 List

Monday, November 20, 2017

Time	Event	(+)
08:30 - 09:30	Breakfast and registration (Exhibition hall)
09:30 - 09:45	Conference opening (Turing's amphitheater)
09:45 - 10:15	Atomic Layer Etching: a precision technique to enable tomorrow's technology (Turing's amphitheater) - Stéphanie Baclet (Oxford Instruments, UK)
10:15 - 10:45	Patterning challenges for ultimate CMOS scaling and beyond CMOS nanofabrication (Turing's amphitheater) - Jean-François de Marneffe (IMEC, Leuveu - Belgium)
10:45 - 11:00	Etching – Lithography – Nano-patterning (Turing's amphitheater)	(+)
10:45 - 11:00	› Microstructuration of titanium for implantable components - Edouard Laudrel, Groupe de recherches sur l\'énergétique des milieux ionisés
11:00 - 11:20	Coffee break (Exhibition hall)
11:20 - 11:35	Flash poster session - Flash poster session 1/2
11:35 - 11:50	Integration of technologies (Turing's amphitheater)	(+)
11:35 - 11:50	› Planar HfOx ReRAM in CMOS BEOL using nanodamascene process - Marina Labalette, Laboratoire des Nanotechnologies et Nanosystèmes
11:50 - 12:05	Etching – Lithography – Nano-patterning (Turing's amphitheater)	(+)
11:50 - 12:05	› MOSFET III-V: from Planar to Ultra-Thin-Body and to Gate-All-Around design - Matej Pastorek, Institut d'électronique, de microélectronique et de nanotechnologie
12:05 - 14:00	Lunch (Agora's restaurant)
14:00 - 14:30	Nitride nanowire LEDs : from rigid to flexible devices (Turing's amphitheater) - Maria Tchernycheva (C2N - CNRS/UPSud, Orsay)
14:30 - 14:45	Synthesis of materials (Turing's amphitheater)	(+)
14:30 - 14:45	› Selective sublimation of GaN for top-down fabrication of nanostructures - Damilano Benjamin, Centre de recherche sur l'hétéroepitaxie et ses applications
14:45 - 15:15	Nanoscale surface engineering by photon-assisted nanoimprint technology (Turing's amphitheater) - Angélique Luu-Dinh (CSEM, Nauchatel - Switzerland)
15:15 - 15:30	Etching – Lithography – Nano-patterning (Turing's amphitheater)	(+)
15:15 - 15:30	› Environment-controlled sol-gel soft-NIL processing for optimized imprinting at sub-micron dimensions. - Thomas Bottein, Institut des Matériaux, de Microélectronique et des Nanosciences de Provence
15:30 - 15:50	Coffee break (Exhibition hall)
15:50 - 16:05	Etching – Lithography – Nano-patterning (Turing's amphitheater)	(+)
15:50 - 16:05	› Fabrication of versatile calibration samples for 3D super-resolution optical imaging with <5nm Z resolution using greyscale e-beam lithography and Nano-Imprint replication - Alexandre LAUVERGNE, Laboratoire d'Analyse et d'Architecture des Systèmes [Toulouse] - Franck Carcenac, Laboratoire d'Analyse et d'Architecture des Systèmes [Toulouse]
16:05 - 16:25	Exhibitor's session - Exhibitor's session
16:25 - 16:40	Flash poster session - Flash poster session 2/2
16:40 - 18:40	Poster session / Lab. tour - Poster session / Lab. tour

Tuesday, November 21, 2017

Time	Event	(+)
08:00 - 08:30	Breakfast (Exhibition hall)
08:30 - 09:00	Surfaces and interfaces bioengineering: functionalization, characterization and application (Turing's amphitheater) - Vincent Humblot (LRS - UPMC, Paris and GDR B2i)
09:00 - 09:30	Surface functionnalization and processing (Turing's amphitheater)	(+)
09:00 - 09:15	› Gold nanorod aggregation in presence of thiolated oligonucleotides - Henryk Laszewski, Laboratoire de Biologie et de Pharmacologie Appliquée
09:15 - 09:30	› Flexible long-range plasmon waveguides for single-mode optical interconnects applications - Laurent Markey, Laboratoire Interdisciplinaire Carnot de Bourgogne
09:30 - 10:00	Nanoparticle assembly: controlling topography and capillary forces at the nanoscale to build functional devices (Turing's amphitheater) - Valentin Flauraud (EPFL, Lausanne - Switzerland)
10:00 - 10:20	Coffee break (Exhibition hall)
10:20 - 10:35	Surface functionnalization and processing (Turing's amphitheater)	(+)
10:20 - 10:35	› Periodic nanostructures formed on mesoporous silicon surface using ultrashort pulse lasers - Nadjib SEMMAR, Groupe de recherches sur l'énergétique des milieux ionisés
10:35 - 10:50	Integration of technologies (Turing's amphitheater)	(+)
10:35 - 10:50	› How to build a Si NW-based transistor without nanoscale processing - Maxime Legallais, Laboratoire des matériaux et du génie physique [Grenoble], Laboratoire des technologies de la microélectronique
10:50 - 11:05	Etching – Lithography – Nano-patterning (Turing's amphitheater)	(+)
10:50 - 11:05	› Sub-micrometer 2D patterned 2 inches wafer using interferential and soft-UV NIL combined nanolithographies techniques - CELINE CHEVALIER, Institut des Nanotechnologies de Lyon
11:05 - 11:35	Controlling domain orientation in self-assembled block copolymer thin films for lithographic application (Turing's amphitheater) - Michele Perego (IMM-CNR, Milano - Italy)
11:35 - 12:05	Integration of technologies (Turing's amphitheater)	(+)
11:35 - 11:50	› Folding Photonic Crystals: Semiconductors ORIGAMI - Jean-Louis Leclercq, Institut des nanotechnologies de Lyon - Site d'Ecully
11:50 - 12:05	› NANO-PROBING STATION INCORPORATING MEMS PROBES FOR 1D DEVICE RF ON-WAFER CHARACTERIZATION - Khadim Daffé, Institut d'électronique, de microélectronique et de nanotechnologie
12:05 - 14:00	Lunch (Agora's restaurant)
14:00 - 14:30	Applications of large area graphene monolayers to electronic and biomedical devices (Turing's amphitheater) - Vincent Bouchiat (Néel, Grenoble)
14:30 - 14:45	Surface functionnalization and processing (Turing's amphitheater)	(+)
14:30 - 14:45	› Molecularly Imprinted Polymer Nano layers for the electrochemical detection of pesticides - Sarra BOUDEN, Interfaces, Confinement, Matériaux et Nanostructures
14:45 - 15:00	Etching – Lithography – Nano-patterning (Turing's amphitheater)	(+)
14:45 - 15:00	› MICROSTRUCTURING OF A CYLINDER BY COLLOIDAL PHOTOLITHOGRAPHY ON FUNCTIONAL TiO2 SOL-GEL - erieta katerina koussi, Laboratoire Huber Curien
15:00 - 15:30	Physical properties and stability of 3D and layered perovskite materials for photovoltaic applications (Turing's amphitheater) - Jacky Even (INSA-FOTON, Rennes)
15:30 - 15:50	Coffee break (Exhibition hall)
15:50 - 16:05	Synthesis of materials (Turing's amphitheater)	(+)
15:50 - 16:05	› IN SITU XPS CHARACTERISATION OF THE FIRST GROWTH STEPS OF SICN:H THIN FILMS FROM TETRAMETHYLSILANE-AMONIA MICROWAVE PLASMAS - Christophe Cardinaud, Institut des matériaux Jean Rouxel
16:05 - 16:20	Surface functionnalization and processing (Turing's amphitheater)	(+)
16:05 - 16:20	› Contribution to the understanding of the first stages of metal surface nanostructuration based on He+ implantation: experiments and simulations - Anne-Lise THOMANN, Groupe de Recherches sur l'Energétique des Milieux Ionisés
16:25 - 17:40	Round table: companies and academics - Round table: companies and academics
17:40 - 18:40	Poster session - Poster session
19:00 - 19:35	Transportation - > to the castle
19:35 - 23:00	Banquet (Gala dinner's castle)

Wednesday, November 22, 2017

Time	Event	(+)
08:00 - 08:30	Breakfast (Exhibition hall)
08:30 - 09:00	Integration of a photovoltaic remote driver with high-voltage MEMS using standard CMOS technology (Turing's amphitheater) - Yoshio Mita (VDEC - Université de Tokyo, Japan)
09:00 - 09:45	Integration of technologies (Turing's amphitheater)	(+)
09:00 - 09:15	› SUBMILLIMETER MULTIJUNCTION SOLAR CELLS DESIGNED FOR VERY HIGH CONCENTRATION PHOTOVOLTAICS - Pierre Albert, Institut Interdisciplinaire d'Innovation Technologique, Laboratoire de l'Intégration du Matériau au Système
09:15 - 09:30	› ZnO nanostructures for electronics : from transistors to nanogenerators - Guylaine POULIN-VITTRANT, GREMAN
09:30 - 09:45	› Robotics assembly for Lab on Fiber new nanoprobes. - Jean-Yves Rauch, FEMTO-ST
09:45 - 10:15	The Involvement of scientists in the ethical debate on nanotechnologies through a personal experience : current actions and perspectives (Turing's amphitheater) - Christophe Vieu (LAAS - CNRS, Toulouse)
10:15 - 10:35	Coffee break (Exhibition hall)
10:35 - 10:50	Renatech award : Elaboration de matériaux pour microbatterie 3D Li-ion par dépôt de couches atomiques (ALD) et caractérisations structurales operando (Turing's amphitheater) - Manon Letiche (IEMN, Villeneuve d'Ascq)
10:50 - 11:05	Renatech award : Sélection et capture de biomarqueurs moléculaires et cellulaires dans un fluide complexe (Turing's amphitheater) - Hélène Cayron (LAAS - CNRS, Toulouse)
11:05 - 11:20	Integration of technologies (Turing's amphitheater)	(+)
11:05 - 11:20	› AlAs/InAlAs superlattice as a sacrificial layer for the epitaxial lift-off of low band gap III-V heterostructures lattice-matched to InP - François Chancerel, Laboratoire Nanotechnologies Nanosystèmes (LN2)- CNRS UMI-3463, Institut des nanotechnologies de Lyon
11:20 - 11:35	Etching – Lithography – Nano-patterning (Turing's amphitheater)	(+)
11:20 - 11:35	› Photolithography and transfer by reactive ion etching of high resolution features from an ecofriendly and water developpable chitosan resist - mathieu caillau, Institut des nanotechnologies de Lyon
11:35 - 11:50	Integration of technologies (Turing's amphitheater)	(+)
11:35 - 11:50	› Packaging of electronic devices using 3D printing technology - Gabrielle Aspar, Laboratoire dÉlectronique et des Technologies de lÍnformation
11:50 - 12:05	Conference closure (Turing's amphitheater)
12:05 - 14:00	Lunch (Agora's restaurant)

Online user: 1

RSS Feed